Summary Basis of Decision for Noromby/Noromby HP

Review decision

The Summary Basis of Decision explains why the product was approved for sale in Canada. The document includes regulatory, safety, effectiveness and quality (in terms of chemistry and manufacturing) considerations.


Product type:

Drug

Summary Basis of Decision (SBD) documents provide information related to the original authorization of a product. The SBD for Noromby/Noromby HP is located below.

Recent Activity for Noromby/Noromby HP

The SBDs written for eligible drugs (as outlined in Frequently Asked Questions: Summary Basis of Decision [SBD] Project: Phase II) approved after September 1, 2012 will be updated to include post-authorization information. This information will be compiled in a Post-Authorization Activity Table (PAAT). The PAAT will include brief summaries of activities such as submissions for new uses of the product, and whether Health Canada's decisions were negative or positive. The PAATs will be updated regularly with post-authorization activity throughout the product life cycle.

 

The following table describes post-authorization activity for Noromby/Noromby HP, a product which contains the medicinal ingredient enoxaparin sodium. For more information on the type of information found in PAATs, please refer to the Frequently Asked Questions: Summary Basis of Decision (SBD) Project: Phase II and to the List of abbreviations found in Post-Authorization Activity Tables (PAATs).

 

For additional information about the drug submission process, refer to the Guidance Document: The Management of Drug Submissions and Applications.

 

Updated: 2024-08-06

 

Drug Identification Number (DIN):

  • DIN 02506440 (Noromby) ‑ 20 mg/0.2 mL (100 mg/mL), enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506459 (Noromby) ‑ 30 mg/0.3 mL (100 mg/mL), enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506467 (Noromby) ‑ 40 mg/0.4 mL (100 mg/mL), enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506475 (Noromby) ‑ 60 mg/0.6 mL (100 mg/mL), enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506483 (Noromby) ‑ 80 mg/0.8 mL (100 mg/mL), enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506491(Noromby) ‑ 100 mg/mL, enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506505 (Noromby HP) ‑ 120 mg/0.8 mL (150 mg/mL), enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506513 (Noromby HP) ‑ 150 mg/mL, enoxaparin sodium, solution, subcutaneous or intravenous administration (prefilled syringe)

 

Post-Authorization Activity Table (PAAT)

 

Activity/Submission Type, Control Number

Date Submitted

Decision and Date

Summary of Activities

NC # 283463

2024-02-02

Issued NOL 2024-05-23

Submission filed as a Level II (90 day) Notifiable Change (Moderate Quality Changes) for a change in the drug product manufacturing process. The submission was reviewed and considered acceptable, and an NOL was issued.

NC # 282100

2023-12-14

Issued NOL 2024-03-21

Submission filed as a Level II (90 day) Notifiable Change (Moderate Quality Changes) for a change in the standard/monograph (i.e. specifications) claimed for the drug substance and a change in the drug substance release or shelf-life specifications. The submission was reviewed and considered acceptable, and an NOL was issued.

SNDS # 268542

2022-10-07

Issued NOC 2023-03-29

Submission filed as a Level II – Supplement (Safety) to update the PM to align with that of the reference biologic drug, Lovenox and Lovenox HP, and migrate it to the 2020 format. The submission was reviewed and considered acceptable. An NOC was issued.

NC # 268147

2022-09-23

Cancellation Letter Received 2022-10-03

Submission filed as a Level II (90 day) Notifiable Change (Moderate Quality Changes) to update the PM to align with that of the reference biologic drug, Lovenox and Lovenox HP, and migrate it to the 2020 format. The proposed revisions exceeded the scope of an NC. The submission was therefore cancelled administratively by the sponsor so as to be filed as an SNDS.

NC # 264141

2022-05-10

Issued NOL 2022-09-09

Submission filed as a Level II (90 day) Notifiable Change (Moderate Quality Changes) for a change in the supplier for a primary container closure component. The submission was reviewed and considered acceptable, and an NOL was issued.

SNDS # 256869

2021-09-22

Issued NOC 2022-05-05

Submission filed as a Level I – Supplement to add a drug substance manufacturing site. The submission was reviewed and considered acceptable, and an NOC was issued.

Drug product (DINs 02506459, 02506467, 02506475, 02506483, 02506491, 02506505, 02506513) market notification

Not applicable

Date of first sale: 2021-06-25

The manufacturer notified Health Canada of the date of first sale pursuant to C.01.014.3 of the Food and Drug Regulations.

NDS # 233058

2019-10-31

Issued NOC 2020-10-14

NOC issued for New Drug Submission.
Summary Basis of Decision (SBD) for Noromby/Noromby HP

Date SBD issued: 2020-01-07

The following information relates to the New Drug Submission for Noromby/Noromby HP.

Enoxaparin sodium

Drug Identification Number (DIN):

  • DIN 02506440 (Noromby) - 20 mg/0.2 mL (100 mg/mL), solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506459 (Noromby) - 30 mg/0.3 mL (100 mg/mL), solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506467 (Noromby) - 40 mg/0.4 mL (100 mg/mL), solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506475 (Noromby) - 60 mg/0.6 mL (100 mg/mL), solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506483 (Noromby) - 80 mg/0.8 mL (100 mg/mL), solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506491(Noromby) - 100 mg/mL, solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506505 (Noromby HP) - 120 mg/0.8 mL (150 mg/mL), solution, subcutaneous or intravenous administration (prefilled syringe)
  • DIN 02506513 (Noromby HP) - 150 mg/mL, solution, subcutaneous or intravenous administration (prefilled syringe)

Juno Pharmaceuticals Corp.

New Drug Submission Control Number: 233058

 

On October 14, 2020, Health Canada issued a Notice of Compliance to Juno Pharmaceuticals Corp. for Noromby and Noromby HP, biosimilar biologic drugs to Lovenox and Lovenox HP (the reference biologic drugs). The terms "biosimilar biologic drug" and "biosimilar" are used by Health Canada to describe subsequent entry versions of a Canadian approved innovator biologic drug with demonstrated similarity to a reference biologic drug. Biosimilars were previously referred to as subsequent entry biologics in Canada. Noromby and Noromby HP contain the medicinal ingredient enoxaparin sodium, which has been demonstrated to be highly similar to enoxaparin sodium contained in the reference products, Lovenox and Lovenox HP.

Authorization of a biosimilar means that it is highly similar to the reference biologic drug in terms of quality and that there are no clinically meaningful differences in efficacy and safety between the two products. For a biosimilar, the weight of evidence is provided by the structural and functional studies. The non-clinical and clinical programs are designed to address potential areas of residual uncertainty. A final determination of similarity is based on the entire submission, including data derived from comparative structural, functional, non-clinical, pharmacodynamic and pharmacokinetic, and clinical studies. The demonstration of similarity between the biosimilar and its reference biologic drug enables the sponsor's submission for the biosimilar to rely on the safety and efficacy information of the reference biologic drug in the indications being sought.

For more information on the authorization of biosimilars, refer to the Health Canada website on Biosimilar Biologic Drugs.

Within this drug submission, the sponsor requested authorization of Noromby and Noromby HP for all of the indications that are currently authorized for Lovenox and Lovenox HP, the reference biologic drugs. Similarity between Noromby/Noromby HP and Lovenox/Lovenox HP was established in accordance with the Information and Submission Requirements for Biosimilar Biologic Drugs Guidance Document.

The market authorization was based on the quality (chemistry and manufacturing) package submitted, as well as demonstrated similarity between the biosimilar and the reference biologic drug. Similarity was established through data derived from comparative structural, functional, non-clinical, and clinical studies. Based on Health Canada's review, the benefit-risk profile of Noromby/Noromby HP is considered to be similar to the benefit-risk profile of the reference products, and it is therefore considered favourable for the following indications:

  • The prophylaxis of thromboembolic disorders (deep vein thrombosis) in patients undergoing:
    • orthopedic surgery of the hip or knee. In addition, Noromby is indicated in hospital or after hospital discharge for long-term prevention of venous thromboembolic diseases following hip replacement surgery.
    • high-risk abdominal, gynecological, or urological surgeries.
    • colorectal surgery.
  • The prophylaxis of deep vein thrombosis in medical patients who are at moderate risk of deep vein thrombosis and who are bedridden due to moderate to severe acute cardiac insufficiency (New York Heart Association [NYHA] class III or IV heart failure), acute respiratory failure revealing or complicating chronic respiratory insufficiency not requiring ventilatory support and acute respiratory infections (excluding septic shock), who require short-term prophylaxis of deep vein thrombosis.
  • The prevention of thrombus formation in the extracorporeal circulation during hemodialysis.
  • The treatment of deep vein thrombosis, with or without pulmonary embolism.
  • The treatment of unstable angina or non-Q-wave myocardial infarction, concurrently with acetylsalicylic acid.
  • The treatment of acute ST-segment elevation myocardial infarction, including patients to be managed medically or with subsequent percutaneous coronary intervention.

 

1 What was approved?

 

Noromby/Noromby HP are biosimilars to Lovenox/Lovenox HP (hereafter referred to as Noromby and Lovenox, respectively).

Noromby is an antithrombotic agent authorized for the following indications:

  • The prophylaxis of thromboembolic disorders (deep vein thrombosis) in patients undergoing:
    • orthopedic surgery of the hip or knee. In addition, Noromby is indicated in hospital or after hospital discharge for long-term prevention of venous thromboembolic diseases following hip replacement surgery.
    • high-risk abdominal, gynecological, or urological surgeries.
    • colorectal surgery.
  • The prophylaxis of deep vein thrombosis in medical patients who are at moderate risk of deep vein thrombosis and who are bedridden due to moderate to severe acute cardiac insufficiency (New York Heart Association [NYHA] class III or IV heart failure), acute respiratory failure revealing or complicating chronic respiratory insufficiency not requiring ventilatory support and acute respiratory infections (excluding septic shock), who require short-term prophylaxis of deep vein thrombosis.
  • The prevention of thrombus formation in the extracorporeal circulation during hemodialysis.
  • The treatment of deep vein thrombosis, with or without pulmonary embolism.
  • The treatment of unstable angina or non-Q-wave myocardial infarction, concurrently with acetylsalicylic acid.
  • The treatment of acute ST-segment elevation myocardial infarction, including patients to be managed medically or with subsequent percutaneous coronary intervention.

Both Noromby and the reference biologic drug, Lovenox, contain the medicinal ingredient enoxaparin sodium, which is the sodium salt of enoxaparin, a mixture of low molecular weight fragments of heparin, obtained by alkaline depolymerization of the benzyl ester of heparin sodium derived from porcine intestinal mucosa.

Similarity between Noromby and Lovenox has been established on the basis of comparative structural and functional studies, comparative non-clinical studies, and a comparative pharmacodynamic study in healthy volunteers in accordance with the Information and Submission Requirements for Biosimilar Biologic Drugs Guidance Document.

The safety and effectiveness of enoxaparin sodium in children have not been established. Evidence from clinical studies and experience suggests that use of enoxaparin sodium in the geriatric population is associated with differences in safety.

The use of Noromby is contraindicated in:

  • Patients who are hypersensitive to this drug or to any ingredient in the formulation, including any non-medicinal ingredient, component of the container or to other low molecular weight heparins and/or heparin.
  • Patients with history of confirmed or suspected immunologically mediated heparin-induced thrombocytopenia (delayed-onset severe thrombocytopenia), within the past 100 days, or in patients in whom an in vitro platelet-aggregation test in the presence of enoxaparin is positive (circulating antibodies).
  • Patients with acute or subacute bacterial endocarditis.
  • Patients with active bleeding.
  • Patients with major blood clotting disorders.
  • Patients with active gastric or duodenal ulcer.
  • Patients with hemorrhagic cerebrovascular accident (except if there are systemic emboli).
  • Patients with severe uncontrolled hypertension.
  • Patients with diabetic or hemorrhagic retinopathy.
  • Patients with other conditions or diseases involving an increased risk of hemorrhage.
  • Patients with injuries to and operations on the brain, spinal cord, eyes and ears.

Furthermore, spinal/epidural anesthesia is contraindicated where repeated treatment doses of enoxaparin sodium (1 mg/kg every 12 hours or 1.5 mg/kg once daily) are required, due to an increased risk of bleeding.

Noromby was approved for use under the conditions stated in its Product Monograph taking into consideration the potential risks associated with the administration of this drug product.

This biosimilar biologic drug is presented as a solution with two different concentrations: 100 mg/mL enoxaparin sodium (Noromby) and 150 mg/mL (high potency) enoxaparin sodium (Noromby HP). In addition to the medicinal ingredient, the solution contains water for injection.

For more information, refer to the Quality (Chemistry and Manufacturing), Non‑clinical, and Clinical Basis for Decision sections.

Additional information may be found in the Noromby Product Monograph, approved by Health Canada and available through the Drug Product Database.

 

2 Why was Noromby/Noromby HP approved?

 

Health Canada considers that the benefit-risk profile of Noromby/Noromby HP (hereafter referred to as Noromby) is similar to that of the reference biologic drug, Lovenox/Lovenox HP (hereafter referred to as Lovenox). Therefore, the benefit-risk profile of Noromby is favourable for the prevention of venous thromboembolic disease, treatment of deep vein thrombosis, treatment of unstable angina and non-Q-wave myocardial infarction and treatment of acute ST-segment elevation myocardial infarction. Similarity between Noromby and Lovenox was established in accordance with the Information and Submission Requirements for Biosimilar Biologic Drugs Guidance Document.

Noromby (enoxaparin sodium) is the sodium salt of enoxaparin, a mixture of low molecular weight fragments of heparin, obtained by alkaline depolymerization of the benzyl ester of heparin sodium derived from porcine intestinal mucosa. It has antithrombotic properties. Enoxaparin preferentially potentiates the inhibition of coagulation factors Xa and IIa and only slightly affects other hemostatic mechanisms such as clotting time. The antithrombotic effect of enoxaparin is well correlated to the inhibition of coagulation factor Xa.

Based on an extensive analytical and biological similarity assessment of Noromby in conjunction with comparative non-clinical data and comparative pharmacodynamic data, the sponsor sought authorization for each of the indications held by the Canadian reference product, Lovenox.

As clinical evidence to support authorization, the sponsor provided a comparative pharmacodynamic study demonstrating pharmacodynamic similarity between Noromby and the reference enoxaparin sodium in healthy volunteers. The results of this study, in combination with the results of extensive comparative physicochemical and functional assessments, provide sufficient evidence of similarity to support the authorization of Noromby for the indications being sought.

The safety profile of Noromby is considered to be comparable to that which has been established for the reference biologic drug, Lovenox. The Adverse Reactions section of the Noromby Product Monograph is based on the clinical experience with the reference biologic drug. Appropriate warnings and precautions are in place in the Noromby Product Monograph to address the identified safety concerns.

Adverse reactions reported during the post-marketing use of enoxaparin sodium (including heparin-induced thrombocytopenia, a severe immune-mediated thrombocytopenia) are also listed in the Noromby Product Monograph.

A Risk Management Plan (RMP) for Noromby was submitted by Juno Pharmaceuticals Corp. to Health Canada. Upon review, the RMP was considered to be acceptable. The RMP is designed to describe known and potential safety issues, to present the monitoring scheme and when needed, to describe measures that will be put in place to minimize risks associated with the product.

A Look-alike Sound-alike brand name assessment was performed and the proposed names, Noromby and Noromby HP, were accepted.

Based on an assessment of the relevant information provided in the submission, Noromby is considered to have a benefit-risk profile similar to that established for the claimed indications, which are currently held by the reference product, Lovenox. Therefore, the benefit-risk balance for Noromby is considered favourable for the prevention of venous thromboembolic disease, treatment of deep vein thrombosis, treatment of unstable angina and non-Q-wave myocardial infarction and treatment of acute ST-segment elevation myocardial infarction.

This New Drug Submission complies with the requirements of sections C.08.002 and C.08.005.1 and therefore Health Canada has granted the Notice of Compliance pursuant to section C.08.004 of the Food and Drug Regulations. For more information, refer to the Quality (Chemistry and Manufacturing), Non‑clinical, and Clinical Basis for Decision sections.

 

3 What steps led to the approval of Noromby/Noromby HP?

 

Submission Milestones: Noromby/Noromby HP

Submission Milestone Date
Pre-submission meeting 2019-05-01
Submission filed 2019-10-31
Screening  
Screening Acceptance Letter issued 2019-12-19
Review  
Review of Risk Management Plan complete 2020-05-08
Labelling Review complete, including Look-alike Sound-alike brand name assessment 2020-10-13
Quality Evaluation complete 2020-10-14
Clinical Evaluation complete 2020-10-14
Notice of Compliance issued by Director General, Biologic and Radiopharmaceutical Drugs Directorate 2020-10-14

 

The Canadian regulatory decision on the review of Noromby/Noromby HP was based on a critical assessment of the data package submitted to Health Canada. The foreign reviews completed by the European Medicines Agency (EMA) and the Australia's Therapeutic Goods Administration were used as added references.

For additional information about the drug submission process, refer to the Management of Drug Submissions and Applications Guidance.

 

4 What follow-up measures will the company take?

 

Requirements for post‑market commitments are outlined in the Food and Drugs Act and Regulations.

The onus is on the sponsor to monitor the post-market safety profile of this biosimilar product as well as the Product Monograph of the reference biologic drug, Lovenox, for safety signals that could affect the biosimilar and make safety updates to the Noromby Product Monograph as appropriate. New safety issues that are first identified with the biosimilar, the reference biologic drug, or other biologics that share a common medicinal ingredient may or may not have relevance to both the biosimilar and the reference biologic drug. For more information, refer to the Fact Sheet: Biosimilars.

 

5 What post-authorization activity has taken place for Noromby/Noromby HP?

 

Summary Basis of Decision documents (SBDs) for eligible drugs authorized after September 1, 2012 will include post-authorization information in a table format. The Post-Authorization Activity Table (PAAT) will include brief summaries of activities such as submissions for new uses of the product, and whether Health Canada's decisions were negative or positive. The PAAT will continue to be updated during the product life cycle.

The PAAT for Noromby/Noromby HP is found above.

For the latest advisories, warnings and recalls for marketed products, see MedEffect Canada.

 

6 What other information is available about drugs?

 

Up to date information on drug products can be found at the following links:

 

7 What was the scientific rationale for Health Canada's decision?
7.1 Quality Basis for Decision

 

Noromby and Noromby HP (hereafter referred to as Noromby) were developed as biosimilars to the reference biologic drugs, Lovenox and Lovenox HP (hereafter referred to as Lovenox). For biosimilars, the weight of evidence is provided by structural and functional studies. Biosimilars are manufactured to the same regulatory standards as other biologic drugs. In addition to a typical chemistry and manufacturing data package that is submitted for a standard new biologic drug, biosimilar submissions include extensive data demonstrating similarity with the reference biologic drug.

Comparative Structural and Functional Studies

The reference product chosen for the biosimilarity assessment was Clexane, authorized in the European Union. Clexane was considered a suitable proxy for the reference product Lovenox as it met all of the requirements set forth in the Information and Submission Requirements for Biosimilar Biologic Drugs Guidance Document.

The quantitative ranges for the quality attributes in the comparability study were established according to well-defined rationales and, where applicable, appropriate statistical calculations. Most of the experiments in the extensive comparability exercise were carried out with the drug substance, whereas some used the drug product.

The results of the comparability study met the acceptance criteria established for demonstrating biosimilarity between Noromby and Clexane. Adequate data have been provided to support the sponsor's conclusion that Noromby is highly similar to Clexane in terms of physicochemical properties, heparin source material and mode of depolymerization, disaccharide building blocks, fragment mapping and sequence of oligosaccharide species, and in vitro biological and biochemical assays.

Characterization of the Drug Substance

The drug substance, enoxaparin sodium, is the sodium salt of enoxaparin, a mixture of low molecular weight fragments of heparin, obtained by alkaline depolymerization of the benzyl ester of heparin sodium derived from porcine intestinal mucosa. Enoxaparin consists of a complex set of oligosaccharides that have not yet been completely characterized. Based on current knowledge, the majority of the components have a 4-enopyranose uronate structure at the non-reducing end of their chain. About 15% to 25% of the components have a 1,6-anhydro structure at the reducing end of their chain. The molecular weight of enoxaparin ranges from 3,800 to 5,000 daltons.

Detailed characterization studies were performed to provide assurance that enoxaparin sodium consistently exhibits the desired characteristic structure and biological activity. Adequate data have been provided to demonstrate comparability of enoxaparin sodium produced on each of the drug substance manufacturing lines.

Results from process validation studies indicate that the processing steps adequately control the levels of product- and process-related impurities. The impurities that were reported and characterized were found to be within the established and acceptable limits.

Manufacturing Process and Process Controls of the Drug Substance and Drug Product

Enoxaparin sodium is produced from heparin sodium obtained from porcine intestinal mucosa.

The manufacturing process of enoxaparin sodium involves four stages: formation of heparin benzethonium salt, formation of heparin benzyl ester, depolymerization, and purification.

The drug product manufacturing process consists of the following six phases: weighing of drug substance, compounding and first filtration of the bulk solution, sterile filtration of the bulk solution, aseptic syringe filling and stoppering, 100% inspection for detection of visible particles and other defects, and secondary packaging of completed syringes.

Sufficient data were provided from the process validation studies to demonstrate that the manufacturing processes are consistent, reproducible, and generate a drug substance and a drug product that are uniform in quality and in compliance with a defined quality profile.

Control of the Drug Substance and Drug Product

The release specifications for the drug substance are supported by adequate data or rationales, and the test methods used are either compendial or validated. Batch analysis data met specifications and were consistent between lots.

Noromby and Noromby HP are Schedule D (biologic) drugs and are, therefore, subject to Health Canada's Lot Release Program as per Health Canada's Guidance for Sponsors: Lot Release Program for Schedule D (Biologic) Drugs.

Stability of the Drug Substance and Drug Product

Based on the stability data submitted, the proposed shelf life and storage conditions for the drug substance and drug product were adequately supported and are considered satisfactory.

The stability data support the proposed shelf life of 36 months for the Noromby and Noromby HP drug products, when stored at room temperature of 15°C to 25°C.

Facilities and Equipment

The design, operations, and controls of the facilities and equipment involved in production are considered suitable for the activities and products manufactured.

Based on risk assessment scores determined by Health Canada, on-site evaluations of the drug substance and drug product manufacturing facilities were not deemed necessary for all but one of the manufacturing sites. Due to the coronavirus disease 2019 (COVID-19) pandemic and travel restrictions at the time of the review, an on-site evaluation could not be conducted at this site. An evaluation of the suitability of the facility was conducted by a thorough review of additional documentation provided upon Health Canada's request. This evaluation was considered adequate to support the final quality review recommendation.

The sites involved in production are compliant with Good Manufacturing Practices.

Adventitious Agents Safety Evaluation

Adequate control measures are incorporated in the manufacturing process of enoxaparin sodium to prevent contamination and maintain microbial control. Purification process steps designed to inactivate any potential viral contaminants are adequately validated. Bioburden testing and bacterial endotoxin testing are integrated in the control strategy and meet relevant guidelines and requirements.

No animal-derived raw material other than the heparin sodium from porcine intestinal mucosa is used for the production of enoxaparin sodium. According to the published literature, pigs are not naturally susceptible to transmissible spongiform encephalopathy (TSE) infection via the oral route and therefore, they are not considered a TSE-relevant animal species. The sourcing of porcine intestinal mucosa is controlled to prevent cross-contamination of the starting material with bovine, ovine or caprine tissues.

 

7.2 Non-Clinical Basis for Decision

 

For biosimilars, the degree of similarity at the quality level determines the scope and the breadth of the required non-clinical data. Non-clinical studies serve to complement the structural and functional studies and address potential areas of residual uncertainty.

Non-clinical studies were conducted to compare the biological and biochemical properties as well as the pharmacodynamic activity of Noromby with those of the reference products Lovenox (authorized in the United States, Lovenox-US) or Clexane (authorized in the European Union).

Enoxaparin sodium cannot be measured directly in the bloodstream. The primary pharmacodynamic effect of enoxaparin sodium, i.e., its inhibitory activity against the coagulation factor Xa (anti-FXa activity), is considered a surrogate for the enoxaparin sodium exposure in vivo.

The anti-FXa and the anti-coagulation factor IIa (anti-FIIa) activities of Noromby measured in vitro were similar to those of the reference products.

Comparable pharmacodynamic activity (anti-Factor Xa activity) was also observed between Noromby and Lovenox-US or Clexane in two in vivo studies of crossover design, conducted in rabbits.

Based on similar in vitro potency in the formation of platelet factor 4 (PF4) complexes, the immunogenic potential of Noromby was predicted to be comparable to that of Clexane or Lovenox-US. In patients treated with a heparin or low molecular weight heparin, the heparin-PF4 complexes undergo a conformational change that may trigger a rare immunogenic response, known as heparin-induced thrombocytopenia (HIT). In vitro, similar kinetics of platelet aggregation using human-derived HIT antibodies was observed between Noromby and Clexane or Lovenox-US. In addition, an in vitro assay using human peripheral blood mononuclear cells showed absence of immune responses for all three products.

In view of the intended use of Noromby, no pharmacological or toxicological issues were identified within this submission to preclude authorization of the product.

The non-clinical dataset submitted for Noromby was in compliance with the requirements for non-clinical studies of biosimilars defined in the Information and Submission Requirements for Biosimilar Biologic Drugs Guidance Document.

For more information, refer to the Noromby Product Monograph, approved by Health Canada and available through the Drug Product Database.

 

 

7.3 Clinical basis for decision

 

For biosimilars, the purpose of the clinical program is to demonstrate that there are no clinically meaningful differences between the biosimilar and the reference biologic drug. The structural complexity of the biologic drug and availability of a relevant and sensitive pharmacodynamic endpoint determine the scope and the breadth of the required clinical data. Accordingly, the clinical program is designed to complement the structural and functional studies and address potential areas of residual uncertainty.

Comparative Pharmacodynamic Study in Healthy Volunteers

A pivotal comparative pharmacodynamic study (ROV-RO20-2015-01) was conducted in healthy volunteers. The pivotal study established comparability in the pharmacodynamic parameters between Noromby and the reference product Clexane (authorized in the European Union). Clexane met all of the requirements set forth in the Information and Submission Requirements for Biosimilar Biologic Drugs Guidance Document to be considered a suitable proxy for Lovenox authorized in Canada.

No Phase III clinical efficacy and safety studies were submitted.

Pivotal Study (ROV-RO20-2015-01)

Study ROV-RO20-2015-01 was a single-dose, randomized, double-blind, two-way crossover, comparative pharmacodynamic study conducted in healthy volunteers. In total, 45 subjects received a single dose (100 mg subcutaneously) of the assigned study drug (Noromby [100 mg/mL] or Clexane [100 mg/mL]) on day 1 of periods 1 and 2 according to the randomization schedule. The washout period between administrations of study drug in each period was at least seven days.

The anti-coagulation factor Xa (anti-FXa) and anti-coagulation factor II (anti-FIIa) activities were the primary pharmacodynamic endpoints compared between Noromby and the reference drug Clexane. Plasma pharmacodynamic parameters calculated for the anti-FXa activity included the area under the effect curve (AUEC) from time 0 to infinity (AUEC0-inf), the AUEC from time 0 to the last measured activity (AUEC0-t), and the maximum anti-FXa concentration (anti-FXamax). The AUEC0-t and the maximum anti-FIIa concentration (anti-FIIamax) were the pharmacodynamic parameters calculated for the anti-FIIa activity.

The 95% confidence intervals of the ratios of the geometric least squares means between Noromby and Clexane for the AUEC0-inf, AUEC0-t, and anti-FXamax of anti-FXa activity, and AUEC0-t and anti-FIIamax of anti-FIIa activity were completely within the equivalence interval of 80% to 125%, thereby demonstrating pharmacodynamic biosimilarity of Noromby to Clexane.

Comparative Safety Assessments in Healthy Volunteers

Comparative safety assessments were carried out in the pivotal comparative pharmacodynamic study (ROV-RO20-2015-01, as described in Comparative Pharmacodynamic Study in Healthy Volunteers).

Following subcutaneous administration of a single dose of Noromby 100 mg under fasting conditions, the safety profile of Noromby was similar to that of the reference product (Clexane) with respect to the results of clinical laboratory measurements, vital signs, electrocardiogram, and local tolerance assessments. The most frequently occurring treatment-emergent adverse events were expected and had similar frequencies for both Noromby and the reference product. None of the treatment-emergent adverse events was of severe, significant, or serious nature.

For more information, refer to the Noromby Product Monograph, approved by Health Canada and available through the Drug Product Database.

Indications

Similarity between Noromby/Noromby HP and the reference biologic drugs, Lovenox/Lovenox HP, was established in accordance with the Information and Submission Requirements for Biosimilar Biologic Drugs Guidance Document. The demonstration of similarity between the biosimilars and their reference biologic drugs enables the sponsor's submission for the biosimilars to rely on the safety and efficacy information of the reference biologic drugs and therefore clinical trials are not required to support each indication.

Within this drug submission, the sponsor provided an acceptable scientific justification for requesting the authorization of each of the indications currently granted to the reference products, Lovenox and Lovenox HP.

Based on the evidence submitted, Noromby/Noromby HP were authorized for the same indications currently held by Lovenox/Lovenox HP, as follows:

  • The prophylaxis of thromboembolic disorders (deep vein thrombosis) in patients undergoing:
    • orthopedic surgery of the hip or knee. In addition, Noromby is indicated in hospital or after hospital discharge for long-term prevention of venous thromboembolic diseases following hip replacement surgery.
    • high-risk abdominal, gynecological, or urological surgeries.
    • colorectal surgery.
  • The prophylaxis of deep vein thrombosis in medical patients who are at moderate risk of deep vein thrombosis and who are bedridden due to moderate to severe acute cardiac insufficiency (New York Heart Association [NYHA] class III or IV heart failure), acute respiratory failure revealing or complicating chronic respiratory insufficiency not requiring ventilatory support and acute respiratory infections (excluding septic shock), who require short-term prophylaxis of deep vein thrombosis.
  • The prevention of thrombus formation in the extracorporeal circulation during hemodialysis.
  • The treatment of deep vein thrombosis, with or without pulmonary embolism.
  • The treatment of unstable angina or non-Q-wave myocardial infarction, concurrently with acetylsalicylic acid.
  • The treatment of acute ST-segment elevation myocardial infarction, including patients to be managed medically or with subsequent percutaneous coronary intervention.

 

 

 

Report a problem or mistake on this page
Please select all that apply:
Date modified: